12-20-2013 12:20 PM
The Mod Utility on the site is the updated version. The website is the only way we offer the Mod Utility. Please let us know if yo have any other questions about this.
01-04-2014 01:03 AM - edited 01-04-2014 01:06 AM
I'm having a strange issue with my 1600s on the ASUS x79 Deluxe mobo:
I have 4 sticks (2-2packs bought) BLT4G3D1608DT2TXOB - BG112NB.W8.
The MOD utility does usually see the two sticks on channel A, but sometimes it either doesn't see the two sticks on channel B or only one of the sticks. I can only adjust the lights, etc. on two or three sticks.
The MOD utility lights screen is usually messed up as well (shown below).
Also, seemingly not related, CPU-Z will not show any sticks in the SPD tab occasionally. Sometimes if I reboot they are back, sometimes not.
Here's a screen shot of a typical messed up MOD utility window (sometimes its worse):
Incidentally, I have all the lights turned off on the RAM except the one stick in channel B that the MOD utility never sees.
MOD Utility v184.108.40.206
The OS (Win 8.1) sees all 16GB of RAM.
Any ideas as to what might be wrong?
01-07-2014 11:22 AM
I am sorry for the issues you are experiencing with your Ballistix RAM. What is the extension at the end of the part number. This should read something like BLT4G3D1608DT2TXOB.16FKR. Thank you in advance for this information.
01-10-2014 11:45 PM - edited 01-11-2014 12:04 AM
No problem at all. I'm a PDXLAN staff member and support Crucial, my fave memory sponsor. Hey, you guys have Crucial Sam!
Sorry for the delay in response.
Actually, all 4 modules do end with 16FKR. I bought them in 2 sets of 2.
I just launched the MOD utility again. After removing power to my system, pulling out each module to check it's numbers, then putting them back in and powering my system on, when I run the MOD Utility and go to the 'Lights' section, I get an error "Crucial modules with programmable LEDs not detected", and CPU-Z does not see the modules in the 'SPD' tab again. If I check for SPD Data in the MOD Utility, it only lists ChannelA_Dimm1.
UPDATE: After removing power, re-seating and rotating the modules, CPU-Z populates it's SPD tab with all 4 modules, and the MOD Utility sees 3 of the 4 modules again. Odd that I'm noticing that one of the Channel A modules seems to be programming a Channel B module...something is pretty messed up.
Let me know if you need more debug on my part and where to go from here.
01-13-2014 11:37 AM
It appears that the RAM that was purchased is not the correct revision of the memory for your system and that is why you are experiencing the issues that you have been. We do offer a compatible revision and we would be happy to swap it out for you. I will private message you some more details about this revision.
01-16-2014 09:02 AM
sorry but i can't understand on the crucial online shop which are the updated versions of Tactical Tracers memory that works fine with X79 and my Asus Rampage IV Extreme.
the Red-Green memory on the shop says that are not compatible with my motherboard...
i need 4x4gb sticks of Red-Green ram and 4x4gb sticks of Blue-Orange ram... is there any compatibile kits with my Rampage IV Extreme?
01-17-2014 09:31 AM
Thank you for your question.
I have looked in to this for you and we unfortunately no longer provide compatible 4GB Ballistix Tracer modules for this system. We do supply compatible 8GB modules in both Red-Green and Orange-Blue.
You can see all compatible memory for this system HERE.
I am sorry for any problems this may have caused.
01-22-2014 10:04 AM
Hello. My system is using the ASUS Rampage IV Gene motherboard and I have 4 x 4GB sticks of the Tactical Tracer in my system. I am running Windows 8. When I try to run the tool in Windows 8 it doesn't find any compatible modules I have to run the tool in compatibility mode (Windows 7), it picks up 1 stick of RAM and allows me to change the colors/pattern etc. The other 3 sticks do not show up.
I know there has been some issues with x79 platform and the RAM.
Is there any fix for this? I might just swap all the RAM into the 1 slot that is readable and set them up that way and be done with it as a temporary solution.